Review of HiLetgo® 120pcs/3*40pcs Breadboard Jumper Wires

Review of HiLetgo® 120pcs/3*40pcs Breadboard Jumper Wires 

Prototype Board Dupont Wire Male to Male, Male to Female, Female to Female, 2.54mm to 2.54mm 20CM Length

THREE TYPE Jumper Wires Ribbon Cables Assortment Kit for Arduino Raspberry PI DIY Robot Building



Introduction

After ordering my package from Amazon.com.au it arrived 3 business days later. It maybe different from where you purchase the item.
I opened the package to reveal that the condition was excellent.

Condition


Well packed in plastic bubble wrap with no bent pins.

Listing

The listing on Amazon.com.au indicated that there are three sets of cables, a male to male, a female to male and a female to female in groups of 40 cables with dimensions of 0.127mm, 36 AWG/ single wire, a length of 20cm(7.87inch)/ at 2.54mm spacing.

Inspection

Close inspection revealed no errors with good construction of parts.
Good solid connections of pins and sockets when inserted into breadboard or pinout headers on boards.


Testing

Using a multimeter to test the continuity of wiring and connection indicted everything was working correctly.

Where to buy?

Amazon Website

Conclusion

These cables are great for prototyping circuits with breadboards, sensors, Arduino and ESP boards.

Comments

Post a Comment

Popular

Installing CH340/ CH341 drivers for Arduino, ESP32 and ESP8266 boards

Image
Installing CH340 / CH341 drivers for Arduino, ESP32 and ESP8266 boards. Introduction With the development of Arduino, ESP32 and ESP8266 boards there has been a requirement to communicate to these devices via USB. There are several of these components or Integrated Circuits (IC) available that are installed on development boards. In order to communicate to these boards with Arduino IDE or other IDEs there is a requirement to install specific drivers. Procedures Close Arduino IDE Mac Download and install drivers from here After installing the drivers the computer is required to be restarted for the drivers to function. To confirm drivers are working correctly connect device goto terminal type ls -l /dev/tty.* the device will be displayed in the list as shown in the Figure 1 Figure 1 - list of devices Caution OSX Sierra (10.12) users It has been reported the driver WILL crash on OSX Sierra. Make sure to use this one instead: ch340 v1.3 driver For fur...
Read more

Setup for using ESP32 development boards

Image
Setup for using ESP32 development boards Installing the ESP32 Core Mac Open Terminal and execute the following command (copy->paste and hit enter): mkdir -p ~ /Documents/Arduino/hardware/espressif && \ cd ~ /Documents/Arduino/hardware/espressif && \ git clone https://github.com/espressif/arduino-esp32.git esp32 Once complete then with following copy->paste into terminal and hit enter cd esp32 && \ git submodule update --init --recursive && \ cd tools && \ python get.py If you get the error below. Install the command line dev tools with xcode-select --install and try the command above again: xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun xcode-select --install Restart Arduino IDE Windows Download and install the latest Arduino IDE  Windows Installer  from  arduino.cc Dow...
Read more