Review of HiLetgo® UNO R3 ATmega328P CH340 Development Board

Review of HiLetgo® UNO R3 ATmega328P CH340 Development Board

Introduction

After ordering my package from Amazon.com.au it arrived 3 business days later. It maybe different from where you purchase the item.
I opened the package to reveal that the condition was excellent.

Condition



Inside of a sealed Anti-static bag.
Comes with additional male header pins and a USB A to USB B cable.

Listing

The listing on Amazon.com.au indicated that it was a Arduino UNO clone board, Meaning it uses an ATmega328P microcontroller chip.  It also has a CH340G USB to serial interface chip.

Inspection

Examination of the board revealed no errors and of good construction. Soldering was clean of any residue. This board uses a Surface Mount ATMEGA328P chip with a ch340T USB to Serial interface chip. It has extra pins that can be soldered on the board allowing additional functionality.

USB to UART chip used:
ch340t chip

Installing CH340/ CH341 driver

Instructions for installing ch341 driver

Testing

Testing to ensure everything is work correctly was done by uploading the standard blink test.
Everything appeared to work fine.

Where to buy?

Amazon Website

Pinout




Conclusion

This product is off good construction with plenty of pinouts and is ideal for beginners getting into micro controllers. 

Comments

Post a Comment

Popular

Installing CH340/ CH341 drivers for Arduino, ESP32 and ESP8266 boards

Image
Installing CH340 / CH341 drivers for Arduino, ESP32 and ESP8266 boards. Introduction With the development of Arduino, ESP32 and ESP8266 boards there has been a requirement to communicate to these devices via USB. There are several of these components or Integrated Circuits (IC) available that are installed on development boards. In order to communicate to these boards with Arduino IDE or other IDEs there is a requirement to install specific drivers. Procedures Close Arduino IDE Mac Download and install drivers from here After installing the drivers the computer is required to be restarted for the drivers to function. To confirm drivers are working correctly connect device goto terminal type ls -l /dev/tty.* the device will be displayed in the list as shown in the Figure 1 Figure 1 - list of devices Caution OSX Sierra (10.12) users It has been reported the driver WILL crash on OSX Sierra. Make sure to use this one instead: ch340 v1.3 driver For fur
Read more

Setup for using ESP32 development boards

Image
Setup for using ESP32 development boards Installing the ESP32 Core Mac Open Terminal and execute the following command (copy->paste and hit enter): mkdir -p ~ /Documents/Arduino/hardware/espressif && \ cd ~ /Documents/Arduino/hardware/espressif && \ git clone https://github.com/espressif/arduino-esp32.git esp32 Once complete then with following copy->paste into terminal and hit enter cd esp32 && \ git submodule update --init --recursive && \ cd tools && \ python get.py If you get the error below. Install the command line dev tools with xcode-select --install and try the command above again: xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun xcode-select --install Restart Arduino IDE Windows Download and install the latest Arduino IDE  Windows Installer  from  arduino.cc Download and inst
Read more