Setup for using ESP8266 development boards

Setup for using ESP32 development boards

Installing the ESP8266 Core

Installing with Boards Manager

Starting with 1.6.4, Arduino allows installation of third-party platform packages using Boards Manager. We have packages available for Windows, Mac OS, and Linux (32 and 64 bit).
  • Install the current upstream Arduino IDE at the 1.8 level or later. The current version is at the Arduino website.
  • Start Arduino and open Preferences window.
  • Enter http://arduino.esp8266.com/stable/package_esp8266com_index.json into Additional Board Manager URLs field. You can add multiple URLs, separating them with commas.
  • Open Boards Manager from Tools > Board menu and install esp8266 platform (and don't forget to select your ESP8266 board from Tools > Board menu after installation).
Boards manager link: http://arduino.esp8266.com/stable/package_esp8266com_index.json
 For further information visit this site here

References

Github website


Comments

Post a Comment

Popular

Installing CH340/ CH341 drivers for Arduino, ESP32 and ESP8266 boards

Image
Installing CH340 / CH341 drivers for Arduino, ESP32 and ESP8266 boards. Introduction With the development of Arduino, ESP32 and ESP8266 boards there has been a requirement to communicate to these devices via USB. There are several of these components or Integrated Circuits (IC) available that are installed on development boards. In order to communicate to these boards with Arduino IDE or other IDEs there is a requirement to install specific drivers. Procedures Close Arduino IDE Mac Download and install drivers from here After installing the drivers the computer is required to be restarted for the drivers to function. To confirm drivers are working correctly connect device goto terminal type ls -l /dev/tty.* the device will be displayed in the list as shown in the Figure 1 Figure 1 - list of devices Caution OSX Sierra (10.12) users It has been reported the driver WILL crash on OSX Sierra. Make sure to use this one instead: ch340 v1.3 driver For fur
Read more

Setup for using ESP32 development boards

Image
Setup for using ESP32 development boards Installing the ESP32 Core Mac Open Terminal and execute the following command (copy->paste and hit enter): mkdir -p ~ /Documents/Arduino/hardware/espressif && \ cd ~ /Documents/Arduino/hardware/espressif && \ git clone https://github.com/espressif/arduino-esp32.git esp32 Once complete then with following copy->paste into terminal and hit enter cd esp32 && \ git submodule update --init --recursive && \ cd tools && \ python get.py If you get the error below. Install the command line dev tools with xcode-select --install and try the command above again: xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun xcode-select --install Restart Arduino IDE Windows Download and install the latest Arduino IDE  Windows Installer  from  arduino.cc Download and inst
Read more